Click to Zoom

TS355

Digital Fluid Dispenser/Controller, 0 - 15 psi/0.07 - 1.0 bar

$ 1,275.00

Standard Lead Time:10 days

Description

The TS350 Series Digital Fluid Dispenser/Controller is equipped with a digital timer, pressure, and vacuum read-out on a large LCD screen. The user-friendly firmware provides the option of programming up to 10 varied, sequenced, or individual shots. This system has a user-programmable manual (purge) and automatic dispense cycle settings (program and time), and features a "Teach Mode" for determining the dispensing time required when the dispensing output is unknown.

Two operating pressures are available: TS350 (1 -100 psi/0.07 - 6.9 bar for general applications), and TS355 (0 - 15 psi/0.07 - 1.0 bar for specific low-viscosity applications).

Specifications

Cycle Rate	1,200 cycles/minute
Timing Range	0.008 - 60.000 seconds
Timing Repeat Tolerance	+/- 0.001%
Input Pressure	100 psi (6.9 bar) Maximum
Operating Pressure (TS350)	0 - 15psi (0 - 1.0bar)
Dispense Modes	Timed, Interrupt, Teach, and Purge
Meets or Exceeds	CE, TUV-GS and NRTL

Features and Benefits

Universal power supply with snap-on plug for worldwide use
User programmable manual purge and automatic dispense cycle settings (program and time)
10 programmable memories for storing and recalling most frequently used dispensing cycle timing
''Teach Mode'' for determining the dispensing time required when dispensing output is unknown
Digital timing from 0.008-60.000 seconds
+/- 0.001% Timing repeat tolerances
Digital pressure and vacuum read out
Adjustable vacuum-driven ''suck back'' to control material ''tailing'' and waste
Stable to conserve work space when multiple TS-350/355 units are used together.
Tactile-responsive user programming buttons
Large, clearly marked air pressure and vacuum control knobs
Digitally displayed pressure in ''psi'' or ''bar''
High visibility, 20 x 4 LCD display panel with back lighting
Accessories included: Universal power adapter, foot switch, syringe barrel stand, 10cc receiver head, air hose with fittings, cable holder and sample dispensing tips

Product Comprise of

TS355 Dispenser Unit
Foot Switch
Power Supply
Sample Tip Kit
10cc Receiver Head Kit
Mounting Brackets
Receiver Head Air Hose Holder
Syringe Barrel Stand

Please Note: The TSD800-6 air filter (not included) is recommended to be installed with the dispenser to ensure proper air filtration. If your shop air does not have filtration, then please remember to purchase a TSD800-6 air filter with the dispenser.

Additional Resources